ELECTRIC ARC FURNACE WATER COOLED ROOF RINGS

Posted by John Bonanno on Jul 7, 2020 8:13:12 AM

The Rose Corporation recently manufactured a 14 foot diameter and an 11 foot diameter replacement "Water Cooled Roof Ring" used on Electric Arc Furnaces.  They are an essential part of the furnace process as a continuous flow of water enters the water jacket, circulates the entire ring and exits in order to keep the roof section of the Electric Arc Furnace cool (see illustration below).

Read More

Topics: welding, industrial fabrication, steel, custom metal fabrication, custom industrial fabrication, contract industrial fabrication

22-1/2 Ton Ladle Lifting Hooks Repair Project

Posted by John Bonanno on Jun 26, 2020 6:44:55 AM
The team at The Rose Corporation recently completed the inspection and replacement of the wear bars on two existing 22-1/2 Ton Ladle Lifting Hooks for a local Steel Mill.  The job requirements included:
  • The inspection of hooks for any loose rivets, which we then removed and replaced if required.
  • The removal of worn wear bars with Arc air.
  • Forming new high strength (A514) wear bars to fit hook shape.
  • The replacement of worn wear bars with new bars, weld and inspect new welds.
Read More

Topics: welding, industrial fabrication, steel, custom metal fabrication, custom industrial fabrication, contract industrial fabrication

LADLE REFURBISHMENT PROJECT

Posted by John Bonanno on Jun 17, 2020 1:19:37 PM

The Rose Corporation has repaired a number of Ladles that are used to pour molten metal in large manufacturing “Steel Mills” and Foundry processes. These Ladles are prone to damage from the heat of the molten metal within them. Several of these Ladles had their Refractory Lining fail, resulting in their shells being damaged.

Read More

Topics: welding, industrial fabrication, custom metal fabrication, custom industrial fabrication, contract industrial fabrication

Prop door aids firefighter training - READING EAGLE

Posted by Edmund Gaffney on Feb 28, 2018 3:47:17 PM

The Rose Corporation recenly donated labor and materials to construct a steel door frame and base to for The Reading Fire Department.  The Reading Eagle featured an article about the door and donation and we ar eproud to have received a letter of thanks and recognition from the Reading Fire Department.  We are proud supporters of the Reading community.

Read More

Topics: reading, pa, contract industrial fabrication

The Rose Corporation AOD Vessel Repair Project

Posted by Bob Skorupsky on Jul 5, 2017 1:03:35 PM

A local specialty steel mill that makes stainless steel contracted with The Rose Corporation to repair an AOD vessel. We originally manufactured this 50,000-lb. vessel in 1998, along with two other identical vessels. After years of using the AOD Vessel under extreme heat conditions, the center of the main body bulged out of round by as much as 3-inches, making it impossible to fit into the trunnion ring that supports it.

Read More

Topics: AOD vessels, custom industrial fabrication, contract industrial fabrication