WASTEWATER TREATMENT COMPONENTS

Posted by John Bonanno on Aug 18, 2020 12:58:00 PM

The Rose Corporation in Reading, Pennsylvania has fabricated numerous components for wastewater treatment plants including Stainless Steel 304 Frames from structural steel shapes, angles, channels, bars, and pipes.

Read More

Topics: industrial fabrication, custom metal fabrication, custom industrial fabrication, contract manufacturing

90-Ton Capacity Kettle Fabrication

Posted by John Bonanno on Aug 3, 2020 12:48:15 PM

Among the large-scale steel and aluminum components regularly manufactured at the Rose Corporation are 90-Ton melting kettles used to process lead into molten lead for the battery industry. Lead batteries are used for a vast number of purposes, but all batteries provide either starting, for instance starting a car, or deep cycle power used to power accessories like trolling motors on boats, winches or lights.

Read More

Topics: industrial fabrication, custom metal fabrication, custom industrial fabrication

ELECTRIC ARC FURNACE WATER COOLED ROOF RINGS

Posted by John Bonanno on Jul 7, 2020 8:13:12 AM

The Rose Corporation recently manufactured a 14 foot diameter and an 11 foot diameter replacement "Water Cooled Roof Ring" used on Electric Arc Furnaces.  They are an essential part of the furnace process as a continuous flow of water enters the water jacket, circulates the entire ring and exits in order to keep the roof section of the Electric Arc Furnace cool (see illustration below).

Read More

Topics: welding, industrial fabrication, steel, custom metal fabrication, custom industrial fabrication, contract industrial fabrication

22-1/2 Ton Ladle Lifting Hooks Repair Project

Posted by John Bonanno on Jun 26, 2020 6:44:55 AM
The team at The Rose Corporation recently completed the inspection and replacement of the wear bars on two existing 22-1/2 Ton Ladle Lifting Hooks for a local Steel Mill.  The job requirements included:
  • The inspection of hooks for any loose rivets, which we then removed and replaced if required.
  • The removal of worn wear bars with Arc air.
  • Forming new high strength (A514) wear bars to fit hook shape.
  • The replacement of worn wear bars with new bars, weld and inspect new welds.
Read More

Topics: welding, industrial fabrication, steel, custom metal fabrication, custom industrial fabrication, contract industrial fabrication

LADLE REFURBISHMENT PROJECT

Posted by John Bonanno on Jun 17, 2020 1:19:37 PM

The Rose Corporation has repaired a number of Ladles that are used to pour molten metal in large manufacturing “Steel Mills” and Foundry processes. These Ladles are prone to damage from the heat of the molten metal within them. Several of these Ladles had their Refractory Lining fail, resulting in their shells being damaged.

Read More

Topics: welding, industrial fabrication, custom metal fabrication, custom industrial fabrication, contract industrial fabrication

Duct Work project sets new standards for The Rose Corporation.

Posted by Elaine McDevitt on Mar 15, 2017 11:00:00 AM

There are two primary differences that set the recent ductwork fabrication job apart from the typical projects manufactured at The Rose Corporation.  It is the first job for which The Rose Corporation held primary responsibility for producing detailed, manufacturing drawings from customer-supplied general arrangement drawings.

Read More

Topics: welding, industrial fabrication, ductwork, duct work, metal, steel

Greater Reading Chamber Visits The Rose Corporation

Posted by Edmund Gaffney on Mar 10, 2017 11:23:40 AM

Last week, we welcomed Deb Heffner, the Business Outreach Director of the Greater Reading Economic Partnership and Randy Peers, the President and CEO of the Greater Reading Chamber and Economic Development Corporation to the Rose Corporation facility in Reading.

Read More

Topics: greater reading chamber of commerce, welding, industrial fabrication, reading, pa